59
Figure 5918 (Page 2 of 2)
Ref. No. 3M Part No. Description
5918-38 78-8070-1529-8 Support – Shaft
5918-39 78-8070-1530-6 Bearing – 6205-2RS
5918-40 78-8057-5739-6 Key – M5 x 5 x 30 mm
5918-41 78-8076-5105-0 Pulley Assembly – Drive
5918-42 78-8052-6713-1 Ring – Polyurethane
5918-43 78-8060-8416-2 Nut – Special, M20 x 1
5918-44 78-8070-1595-9 Support – Drive
5918-45 26-1003-5842-8 Screw – Hex Hd, M8 x 20
5918-46 78-8070-1522-3 Gearmotor – 115V, 60HZ
5918-47 78-8076-4515-1 Capacitor – 115V Gearmotor
5918-48 78-8070-1524-9 Sprocket – 3/8" Z=17
5918-49 78-8023-2479-4 Set Screw – W/End Cup, M6 x 10
5918-50 78-8070-1523-1 Screw – 1/4-28 x 1/2 SHCS
5918-51 78-8100-1042-7 Washer – /15 x 6.35 x 2
5918-52 78-8070-1597-5 Chain – 3/8" P=62
5918-53 78-8070-1598-3 Cover
5918-54 26-1002-4955-1 Screw – Self Tap 8P x 13
5918-55 78-8005-5740-3 Washer – Plain, 4 mm
5918-56 78-8070-1596-7 Union – Elbow, PG 13,5
5918-57 78-8076-4622-5 Cover – Rear Upper
5918-58 78-8060-8087-1 Screw – M5 x 10
5918-59 78-8005-5741-1 Washer – Flat, M5
5918-60 78-8070-1531-4 Belt – Drive, W/Hook
5918-61 78-8113-6890-7 Cover – Upper, Front, W/English Language Label
5918-62 78-8113-6889-9 Guard – Belt, R/H, W/English Language Label
5918-63 78-8113-6888-1 Guard – Belt, L/H, W/English Language Label
5918-64 78-8076-4625-8 Screw – Special, M5 x 16
5918-65 78-8054-8821-6 End – Cap
5918-66 78-8076-4702-5 Grommet – /28
5918-67 78-8076-4500-3 Stud – Mounting
5918-68 78-8100-1236-5 Belt Tensioning Assembly – R/H
5918-69 78-8100-1237-3 Belt Tensioning Assembly – L/H
5918-70 78-8100-1238-1 Belt Tensioning – R/H
5918-71 78-8100-1239-9 Belt Tensioning – L/H
To Next Page
Loading...
