To Next Page

To Previous Page

™

Pocket Projector 180

English

Transfer Files to Projector

The 3M 180 projector has 1 GB of internal memory. To access the projector’s

internal memory or the microSD Card memory:

1 Connect the USB cable to the projector.

2 Connect the USB cable to the computer.

3 Turn on the projector

4 The projector will be detected as a removable drive labeled “180” by the

computer. The computer will detect a second removable drive when a

microSD Card is installed into the projector.

5 The projector will display a picture of a PC with a USB cable coming from it.

6 Now the projector is ready to receive a ﬁle from your computer.

Important Note: To conserve power, the projector will stop projecting an image

while connected to a computer USB port.

3M MP180 User Manual

Other manuals for 3M MP180