3M MPRO150 - Transferring Files to the Projector

3M
™
Pocket Projector MPro150
26 © 2010 3M. All Rights Reserved.
English
Transfer Files to Projector
The 3M MPro150 has 1 GB of internal memory. To access the projector’s internal memory or
the microSD Card memory:
1 Connect the USB cable to the projector.
2 Connect the USB cable to the computer.
3 Turn on the projector
4 The projector will be detected as a removable drive labeled “MPro150” by the computer.
The computer will detect a second removable drive when a microSD Card is installed into
the projector.
5 The projector will display a picture of a PC with a USB cable coming from it.
6 Now the projector is ready to receive a file from your computer.
Important Note: To conserve power, the projector will stop projecting an image while
connected to a computer USB port.