15
2.5 Attach the boom microphone arm guide on the headband by rotating the arm guide and align it so it ts with relative ease as
shown in gure 2.5-a and 2.5-b. NOTE: Make sure you rotate the boom microphone earcup arm guide as shown in the gures,
because of the earcup arm guide lock when positioned in place.
(2.5-b)(2.5-a)
2.6 Install the headband with the boom microphone earcup arm guide on the left earcup. First rotate the left cup to install the earcup
arm guide as shown in gure 2.6.-a and 2.6-b. Force will be required. NOTE: The boom microphone earcup arm guide should be
installed mirrored to the other earcup arm guides to avoid conict with the boom microphone connector jack.
(2.6-b)
(2.6-a)
2.7 Rotate the boom microphone earcup arm guide in position, and install the boom microphone connector to the earcup connector
jack on the left earcup as shown in gure 2.7-a and 2.7-b.
(2.7-a)
(2.7-b)
EN
To Next Page
Loading...
