To Next PageTo Next Page
Need help?Do you have a question about the 3M Protecta series and is the answer not in the manual?
General| Brand | 3M |
|---|---|
| Material | Polyester, Steel |
| Length | Varies by model |
| Weight Capacity | Varies by model |
| Standards | ANSI, OSHA |
Details maximum arresting force and distance for SRLs based on worker weight.
Defines strength requirements for anchorages used with fall arrest systems.
Outlines inspection intervals and procedures by authorized and competent persons.
Instructs on using self-locking connectors and avoiding inappropriate connection methods.
Details selecting rigid anchorage points and ensuring they are at or above the user's Dorsal D-Ring.
Explains single and twin SRL mounting options on a full body harness.
Details pre-use checks for worn/damaged parts, fasteners, and lifeline retraction/locking.
Instructs to remove SRLs from service after arresting a fall or if damage is present.
Reiterates the requirement for a full body harness and correct connection points.
Reinforces connector compatibility, roll-out prevention, and anchorage strength.
Covers pre-use inspection, system connections, movement, and controlled lifeline recoil.
Instructs to remove SRLs from service if unsafe or defective and dispose of them.
