3M Scotch-Weld User Manual

© 3M 2006
10
Troubleshooting
Your 3M™ Scotch-Weld™ Hot Melt Applicator PG
II has been engineered for durability and reliability.
However, as with any electrical-mechanical device,
parts will wear with use and require replacement for
maximum performance. We have listed below certain
part kits that you may want to have available in case
the immediate need for replacement arises. All part
kits listed are available from your authorized 3M
Scotch-Weld Hot Melt Adhesive distributor or from
the nearest 3M Sales Branch location listed on back
cover of this manual.
Please note the serial number
of your 3M Scotch-Weld Hot Melt Applicator PG
II before ordering part kits.
No. of Scotch-Weld Hot Melt
Kit Applicators in Use
Number Name Stock Number
2-5 6-10 11-15 16-20
9200 Trigger Kit 62-9200-6921-8 0 0 1 1
9203 Heat Shield Kit 62-9203-6901-4 0 1 1 2
9204 Regulator Kit 62-9204-6922-8 1 1 2 2
9207
Power Cord Kit 62-9207-6947-8 0 0 0 1
9209 Thermostat/TCO Kit 62-9209-6962-3 1 2 2 3
9219 Switch Kit 62-9219-2798-4 0 0 1 1
9220 Hose Kit 62-9220-2797-4 0 001
9221 Handle Kit 62-9221-2651-1 0 0 0 1
9222 Heater Kit 62-9222-6930-3 0 0 1 1
9223 Valve Kit 62-9223-6930-1 1 2 3 4
9226 Dump Valve Kit 62-9226-6990-8 0 0 1 1
9260 S/L Hose Assem. Kit 62-9260-2945-5 0 0 1 1
Recommended Part Kits

3M Scotch-Weld Specifications

General

Brand	3M
Model	Scotch-Weld
Category	Power Tool
Language	English