3M
™
WorkTunes
™
Hearing Protector User Guide 15
Programming Basics
To TUNE to a radio station:
• Press the AM/FM Button one time. Vocal
Assist will confirm the current frequency
(AM or FM)
• Turn the Tuning Knob clockwise to select
the frequency. Vocal Assist will confirm
the selection and, after a slight delay, will
state the station
To PROGRAM favorite stations:
• Press the Mode Button one time until you
hear “Frequency Mode”
• Find a radio station you like, press and
hold in the Mode Button until you hear
“Station Stored”
To RECALL favorite stations:
• Press the Mode Button one time until you
hear “Recall Mode” – in this mode you
can only listen to stored stations
• Turn the Tuning Knob to find stored
stations – press it to move through
stored stations
To AUTO PROGRAM local stations:
• Press the Mode Button one time until you
hear “Frequency Mode”
• Press and hold the Tuning Knob in for 3
seconds – you’ll hear “Auto Seeking” and
beeps as stations are programmed
To RECALL local stations:
• Press the Mode Button one time until you
hear “Recall Mode”
• Turn the Tuning Knob to move through the
radio stations – press it to move through
stations one by one
To DELETE stored stations:
• Press the Mode Button one time until you
hear “Recall Mode”
• Press and hold the Mode Button in until
you hear “Station Deleted”
Programming
To Next Page
Loading...
Need help?
General
