22
Projector Control
Projector Control
Projector Control
The items shown in the table below can be
performed using the [Projector Control] menu.
Select an item using the up and down arrow keys
on the PC.
Most of the items have a submenu.
Refer to the table below for details.
Controls the projector.
Item Description
Main
Power Turns the power On/Off.
Input Source Selects the input source.
Picture Mode Selects the Picture Mode setting.
Blank On/Off Turns Blank On/Off.
Mute Turns Mute On/Off.
Freeze Selects the Freeze setting.
Magnify
Controls the Magnify setting. In some input sources, it might
stop "Magnify" even though it does not reach to maximum
setting value.
Picture
Brightness Adjusts the Brightness setting.
Contrast Adjusts the Contrast setting.
Gamma Selects the Gamma setting.
Color Temp Selects the Color Temp setting.
Color Adjusts the Color setting.
Tint Adjusts the Tint setting.
Sharpness Adjusts the Sharpness setting.
Active Iris Selects the Active Iris setting.
MyMemory Recall Recalls the MyMemory data.
MyMemory Save Saves the MyMemory data.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.
To Next Page
Loading...
