3M X90w - Wireless LAN Connection Set up

17
2. Equipment connection and network setting
2.4 Manual network connection setting – For wireless LAN (Continued)
Using wireless LAN utility for Windows XP standard.
Wireless LAN initial settings for the projector is as follows.
Connection Control : Ad-Hoc
SSID : wireless
Channel : 1ch
Encryption rating : None
Communication speed : AUTO
IP address : 192.168.1.10
* You can change these settings as you want. Use conguration utility or menu to
change. (Refer to section 2.5)
1) Open ”Network Connections”. (Fig. 2.4.2.a)
Fig. 2.4.2.a “Network Connections”
2) Make wireless network connection “Valid” and other network devices “Invalid”.
3) Open “Wireless Network Connection Properties”. (Fig. 2.4.2.b)
Fig. 2.4.2.b “Wireless Network Connection Properties” window (1)
2.4.2 Wireless LAN connection set up