3M X90w - Email Alerts and Notifications

68
4. Utilize projector – Advanced -
The projector can automatically send an alert to specied e-mail addresses when
the projector requires maintenance or has encountered an error.
• Up to ve e-mail addresses can be specied.
• The projector may be not able to send e-mail if the projector suddenly loses
power.
NOTE
Mail Settings (

26)
To use the projector’s e-mail function please congure the following items via a
web browser.
Example: If the IP address of the projector is set to 192.168.1.10/:
• A Network Restart is required after the SMTP Port conguration
settings have changed. Click [Network Restart] and congure the following
items.
NOTE
6) Click [Mail Settings] and congure each item. Refer to the [Mail Settings]
item in [Conguring and Controlling the Projector via a Web Browser] for
further information.
7) Click the [Apply] button to save the settings.
• Click the [Send Test Mail] button in [Mail Settings] to conrm
that the e-mail settings are correct. The following mail will be delivered to the
specied addresses.
NOTE
Subject line : Test Mail <Projector name>
Text : Send Test Mail
Date <Testing date>
Time <Testing time>
IP Address <Projector IP address>
MAC Address <Projector MAC address>
1) Enter [http://192.168.1.10] into the address bar of the web browser.
2) Enter the Administrator ID and Password and click [Logon].
3) Click [Port Settings] on the main menu.
4) Click the [Enable] check box to open the SMTP Port.
5) Click the [Apply] button to save the settings.
4.4 Failure & Warning Alerts via E-mail