3M X90w - Page 21

21
2. Equipment connection and network setting
Refer to the following for conguring or controlling the projector via a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter
[http://192.168.1.10/] into the address
bar of the web browser and the screen
in Fig. 2.5.a will be displayed.
2) Enter your ID and password and click
[Logon].
If the logon is successful either the Fig.2.5.b or Fig.2.5.c screen will be displayed.
3) Click the desired operation or conguration item on the main menu located on
the left-hand side of the screen (Fig. 2.5.b or Fig. 2.5.c).
Fig. 2.5.b "Logon with administrator ID" Fig. 2.5.c "Logon with user ID"
Fig. 2.5.a "Logon Menu"
2.5 Conguring and controlling the projector via a web browser (Continued)