3xLogic VISIX Gen III Series - Camera Configuration; Video and Audio Settings

Pg. 11Pg. 10
Day & Night Settings
2
EXT LED
AUTO : The LEDs are enabled/ disabled by the CDS Sensor on the LED Board.
OFF : The camera’s LEDs are disabled manually.
3
DELAY
LOW/MIDDLE/HIGH : Time interval delay before switching from day mode to night mode.
4
SMART IR
0 ~ 20 : Enable Smart IR and set the level. Higher values will make Smart IR stronger.
DAY / NIGHT
MODE
AGC THRES
AGC MARGIN
CDS THRES
CDS MARGIN
EXTERN SW
EXT LED
DELAY
SMART IR
EXIT JUMP
AUTO
____
____
3
5
LOW
AUTO
LOW
5
EXPO MOTI PRIVRGB D&N FUNC SET EXIT
2
4
3