Product Handbook
Product HandbookProduct Handbook
Product Handbook
EAP760 Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
8
Getting Started
4ipnet EAP760 supports web-based configuration. When hardware installation is complete, EAP760 can be
configured through a PC by using a web browser such as Mozilla Firefox 2.0 or Internet Explorer version 6.0
and above.
The default values of LAN IP address and subnet mask of EAP760 are:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Steps:
1. To access the Web Management Interface, connect the administrator PC to the Uplink port of EAP760 via
an Ethernet cable. Then, set a static IP address on the same subnet mask as EAP760 in TCP/IP of your
PC, such as the following example:
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
2. Launch the web browser on your PC by entering the IP address of EAP760 (https://192.168.1.1) in the
address field, and then press Enter.
Example of entering EAP760's default IP Address via a web browser
3. The following Admin Login Page will appear. Enter “admin” for both the Username and Password fields,
and then click Login.
To Next Page
Loading...
