3.6 Measures in case of failure
Trouble Cause Measures to be taken
Insufcientornohotwateratall The temperature is set too low Adjust the regulating thermostat higher
The safety thermostat is interrupting
the electric circuit
Press the reset button
There is no hot water supply left Reduce the hot water consumption.
Admit the necessary heating time
The plug is out of the socket Put the plug into the socket
The cause cannot be determined Turn off the main switch and/or remove
the plug from the socket
Leakage Insufcientpackingofthewater
connection (threaded connection)
Tighten the threaded connections
Leakage due to other water apparatus
or pipes, sited in the neighbourhood
Find the cause
To Next Page
Loading...
Need help?
General
