1. GENERAL
1.1 Description of the apparatus
The construction and equipment of the electric storage
heater meet the European standards for electric
household apparatus (IEC 335-1 and IEC 335-2-63 /
EN60335-2-21). Thus, the heater is in conformity with
the European directives of electric household apparatus,
implying the authority to bear the CE-mark. The heater is
appropriate for a working power of 8 bar. The tank is of
steel plate and has got a glasslined coating, in its interior.
Simultaneously,thetankisprovidedwithtwosacricial
anodes, as an additional protection against corrosion. A
thick FFC insulating layer, surrounded by a steel casing
is preventing it from an unnecessary loss of heat. As
soonastheheaterwillbecompetelylledwithwater,it
will continually be under the pressure of the water supply.
Draininghotwater,theheaterwillimmediatelyberelled
with cold water. A good transmission of heat is given by
the use of incolony heating elements.
Additional comfort can be created by making use of
a circulation pipe with the corresponding pump. The
connection of the above pipe will have to take place at the
cold water pipe.
1.2 Technical safety devices
1.2.1 Thermostat
The heater is provided with one or two regulating
thermostats with a setting range between 32 °C and 82 °C.
Further on, the heater is equipped with one safety thermostat,
being set at 95 °C.
To Next Page
Loading...
Need help?
General
