A.O. Smith Epsilon EB-40 User Manual

8
User Manual Epsilon-Series
The boiler display
The reading of the boiler display can be done in two ways.
The Good reading
During this reading the display will only show
what is necessary. Under normal circumstances
the display will give a Good reading. If a fault
is detected the boiler will be blocked. This will be
shown with, alternate display of Good, with an E
of Error or a BL of Blocking and a number code.
For further information refer to page 13 "Errors,
maintenance and warranty" .
The technical reading
During this reading the display will show in which
operating status the boiler is active. The techni-
cal reading is shown alternately with the water
pressure. The rst gure in the technical read out
indicates the status in which the boiler is active
and the third and fourth gure indicate the water
temperature of the boiler. For example in the
reading P 1.9 the character P stands for pres-
sure which represents the water pressure. The
third and fourth gure indicate the water pressure
in bar.
If a fault is found, the same is shown as described
under "The Good reading".
Selecting the Technical or Good reading.
- Press the Step key for 5 seconds.
The display will change from the Good reading to
the technical reading or vice versa.

A.O. Smith Epsilon EB-40 Specifications

General

Brand	A.O. Smith
Model	Epsilon EB-40
Category	Boiler
Language	English