Need help?Do you have a question about the A.O. Smith Upsilon and is the answer not in the manual?
General| Category | Boiler |
|---|---|
| Brand | A. O. Smith |
| Model | Upsilon |
| Fuel Type | Natural Gas or Propane |
| Weight | Varies by model |
| Dimensions | Varies by model |
Describes how to mount boilers in a line on the wall.
Details mounting boilers in a line on a free-standing frame.
Explains mounting boilers back-to-back on a free-standing frame.
Instructions for connecting the boiler to the system.
Covers the installation of the CH system and pipe headers.
Details the requirements and installation of expansion vessels.
Specifies requirements for filling water quality and treatment.
Covers the installation and regulations for gas lines.
Explains condensate drain system installation and routing.
Describes connecting boilers for parallel flue gas and air supply.
Details converting the boiler for a concentric flue gas connection.
Explains connecting flue gas and air supply systems.
Discusses options and considerations for individual flue gas outlets.
Explains collective flue gas outlet systems and their types.
Describes condensate drainage for collective flue gas systems.
Covers operating boilers via external controls like On-Off or OpenTherm.
Provides detailed wiring diagrams for boiler connections.
Explains the different operational states of the boiler.
Details the keyboard layout for boiler control and operation.
Guides through the boiler start-up and commissioning process.
Explains how to set flow water temperature with external controls.
Provides instructions for filling and venting the heating system.
Details the pre-set clock programs for heating and hot water.
Overview of the setting level menu structure for installers.
Options for setting up clock programs for heating and DHW.
Detailed explanations of various boiler parameters and their settings.
Specifies the recommended intervals for boiler maintenance.
Outlines checks required before starting up the boiler.
Procedure for checking the boiler's emissions during operation.
Method for checking and adjusting the O₂ percentage.
Step-by-step guide for performing maintenance tasks.
How to reset the service counter after maintenance.
Outlines the general terms and duration of the warranty.
Specifies the warranty coverage for the stainless steel heat exchanger.
Lists conditions that must be met for the warranty to apply.
Details situations that void the warranty.
Defines the extent of A.O. Smith's warranty obligations.
Procedure for submitting warranty claims.
States A.O. Smith's warranty commitments and liabilities.
To Next Page
