FPS/FPSE/FPD TECHNICAL TRAINING AND SERVICE WORKBOOK
FPS 40 and 50 SERVICE AND OPERATION cant
Trouble-
shooting cont
PRELIMINARY CHECKS
1. Gas valve knob is in ON position
2. Pilot is burning
3. 120 VAG is supplied to heater.
(See page 25)
4. Thermostat is calling for heat
5. Blower ON/OFF switch is in the ON position
6. Connection between blower motor and blower control box is secure
7. Heater is installed per manual
@1995
A.D. Smith
Water Products Co.
Technical Information
Irving, Texas
24
To Next Page
Loading...
