18
Owner`s manual
4.7 Luggage Carrier
Your A2B equipped with a durable luggage carrier. Please carefully
read the instructions below before using the luggage carrier.
1. The rack is attached to the carrier support by 4 x countersunk
screws. The support is screwed on the frame by 4 x countersunk
screws. If you are frequently using the luggage carrier, always
check that the screws are secured tightly at torque value 6-8 Nm.
2. The maximum weight that could be carried is 10 Kg.
3. Please ensure that the luggage is fastened securely, so that it
can not fall off while riding. Take care that loose straps or other
items can not get caught by the spokes or wheels while riding.
4. The luggage carrier is not designed for carrying a second rider
or for the attachment of a child seat. It should also not be used
to pull a trailer.
5. Do not modify the luggage carrier.
6. Distribute the weight of your luggage or goods evenly between
the two sides of the luggage carrier.
7. Please be aware when the luggage carrier is loaded, your A2B
may behave differently, especially when steering or braking.
8. Once you have attached your luggage to the luggage carrier,
please be aware that the rear light and reflector may be obscured
by your luggage.
Failure to observe these instructions can result in serious or
fatal injury.
To Next Page
Loading...
