a2b Ferber - Handle Bar and Steering; Battery

27
• Handle bar and steering: Please ensure, that the bolts of the
handle bar (see section 3.5) and of the bar stem (see section 3.6)
are tightened with the correct torque. The two allen screws for the
handle bar clamp have to be tightened with 5 Nm torque.
• Battery: Check the display prior to setting off on your journey to
ensure the battery has enough charge to easily last your journey.
If you don’t understand any aspect of the assembly, use and care
of your A2B, please ask your A2B dealer.