33
No power? Here are some solutions.
If they do not solve your problem ask an A2B dealer for help.
Problem
A2B does not turn on.
A2B turns on, but the motor does not run
(display illuminates and state-of-charge
indicator shows a charged battery).
Motor power is decreasing while climbing
uphill.
Possible cause(s)
Dead battery
1. A brake lever is applied.
2. The motor power connector is not
properly connected.
3. No assist level selected (P0-0).
Motor temperature is getting too high.
Solution
Recharge the battery. See section 5.3
Do not apply the brakes when starting the
vehicle. Make sure brake levers are fully
forward.
Ensure the motor power connector is
securely connected.
Select assist level (P0-1, P0-2 or P0-3).
Let the motor cool down.
9.0 Trouble Shooting
To Next Page
Loading...
