1.0 Introduction 4
2.0 Important information 5
3.0 Your A2B 6
4.0 Please familiarise with the functions of your A2B
before your first tour 12
5.0 Operating instructions display and motor 16
5.1.1 Important instructions – please observe in any case! 16
5.1.2 Intended use of the neodrives components 16
5.1.3 Admissible operating conditions / places of use 17
5.1.4 Standard scope of supply 17
5.1.5 Technical data 18
5.2. Controller 20
5.3. smart Man-Machine Interface (sMMI) 20
5.3.1 Fitting and removing the sMMI 22
5.3.2 Functions of the sMMI 23
5.3.2.1 Switching on and off 23
5.3.2.2 Start menu 24
5.3.2.3
Dynamo function and switch-on routine "light“ (optional)
25
5.3.2.3 Selection of the assistance level 25
5.3.2.5 Activation of recuperation 26
5.3.2.6 Braking assistant 27
5.3.2.7 Walk assist / Walk assist button 28
5.3.2.8 Date and time 30
Contents
5.3.2.9 Assist mode 30
5.3.2.10 Display of travelling information 31
5.3.2.11 Display of information and warnings 32
5.3.2.12 Easy Display mode 33
5.3.2.13 Other settings 33
5.3.2.14 USB port 34
5.3.2.15 Programming options by the specialist dealer 34
5.3.2.16 Firmware updates and their transmission 35
5.3.2.17 Information on the sMMI plugs 36
5.4. Thermal management 36
5.5. Motor 38
5.5.1 Removal of the drive wheel 38
5.5.2 Attachment of the drive wheel 40
5.6. Cleaning of the motor and sMMI 41
5.6.1 Motor 41
5.6.2 sMMI 42
5.7. Transport 42
5.8. Warnings 42
5.9. Error indications and possible remedies 42
To Next Page
Loading...
