20
Owner’s manual
5.2. Controller
The controller fitted to the handlebar of your
A2B is used to access menus
and activate functions in the sMMI. The
following functions are stored:
Button 1 = UP (one step upwards)
Button 2 = confirm menu button or
selection
Button 3 = DOWN (one step downwards)
5.3. Smart Man-Machine Interface (sMMI)
The sMMI is fitted to your Pedelec's
handlebar or stem. You may access various
functions, activate or deactivate parameters
using the controller's buttons (see section
2). For some functions you may also
permanently store various parameters in the
software of the sMMI (see section 3.2.15).
Please contact your specialist dealer
regarding this matter, they will be happy
to inform and advise you. The following
contains an overview of the menu structure
of the sMMI for further information.
To Next Page
Loading...
