Product Introduction
N2201SS vector impedance analyzer is mainly used for testing the
antenna, RF component impedance and the circuit board impedance.
With built-in high-capacity lithium-ion battery, N1201SA series product is
small enough to be placed in the pocket and really convenient for
outdoor and high-altitude special operations. Clear and simple display screen
interface and button operation make it easy to use as well.
N2201SS is equivalent to enhanced N1201SA and then add a RF power
meter function. The detection range of the RF power meter is -20dBm～
+8dBm, and the detection accuracy is <±1dB（Input power 0dBm ~
+8dBm）.This power meter can be applied directly to the measurement of
small power and micro power communication equipment. High power
equipment needs to be used with couplers or attenuators.
Main Features:
① Wide frequency range:137.5 MHz to 2700 MHz
② Small size: 9 * 10 * 2.8 (cm); light weight (net weight): 240g
③ Built-in 2000mAH polymer lithium battery, continuous working time
more than 4 hours.
④ High resolution, 4 significant figures (single point measurement).
⑤With calibration function, accurate measurement is guaranteed.
⑥ Cost-effective.
Notes：
1.Calibration Kit need to be purchased separately.
2.Power-On：Hold down the CTRL key and press OK to turn on.
Power-Off：Press and hold (> 2S) to turn off the instrument.
To Next Page
Loading...