4
U.S.A. models
Indicators
STABLE ? Indicates when the reading is stable.
NET
?
Indicates when NET weight is displayed. (Tare function is used.)
ZERO
?
Indicates when the scale zero is correct.
HI OK LO Indicates when the scale zero is correct.
Weighing units “kg” and “pcs” for metric models
“lb”, “oz”, “kg” and “pcs” for U.S.A. models
Switches
PRINT Switch
Outputs the weight value to printer. In the setting mode,
this switch is used to increment the val
digit blinking.
ON/OFF Switch
Used to turn the power on or off. When turned on, the
scale will be automatically set to zero (power-on zero).
MODE Switch
Switches the weighing unit. In the setting mode, this
switch is used to store a parameter and go to the next.
Weighing unit
PRINT switch
ON/OFF switch
MODE switch
To Next Page
Loading...
