What does parameter setting error mean on A&D Scales?
A parameter setting error on A&D Scales means the received data exceeds the range that the balance can accept. To resolve this, confirm the parameter range of the command.
What causes automatic response adjustment zero error on A&D GX-300?
The automatic response adjustment zero error on A&D Scales indicates that there is something on the pan. Clear the pan and press the CAL key to return to the weighing mode.
What does excess characters error mean on A&D GX-300 Scales?
An excess characters error on A&D Scales means the balance received excessive characters in a command. Confirm the command to resolve this issue.
How to resolve undefined command error on A&D Scales?
To resolve an undefined command error on A&D Scales, confirm the command you are trying to execute.
What to do for unit mass error on A&D Scales?
If you encounter a unit mass error on your A&D Scales, add samples to reach the specified number and then press the PRINT key.
What to do if A&D GX-300 show sample mass error?
If your A&D Scales display a sample mass error, it suggests that the sample is too small. Use a larger sample to resolve this issue.
General| Capacity | 310 g |
|---|---|
| Readability | 0.001 g |
| Repeatability (σ) | 0.001 g |
| Linearity | ±0.002 g |
| Operating Temperature | 5°C to 40°C |
| Power Source | AC adapter (included) |
| Interface | RS-232C |
| Calibration | External calibration |
| Display | Vacuum Fluorescent Display |
| Units of Measurement | g, oz, ozt, ct, mom, dwt, % |
| Pan Size | 128 mm (diameter) |
| Stabilization Time | 1.5 seconds (typical) |
Highlights key features like built-in calibration, automatic self-calibration, data memory, and GLP output.
Step-by-step guide to installing the balance, including leveling, connecting the adapter, and warm-up.
Guidelines for optimal balance performance, including environment, leveling, power, and initial calibration.
Important considerations during weighing, such as static electricity, magnetic materials, temperature differences, and handling.
Step-by-step guide for basic weighing, including taring, placing samples, and reading values.
Explains how to use the counting mode, including storing sample unit mass and using ACAI for accuracy.
Details how to use the percent mode for target weighing or sample variability checks.
Explains automatic adjustment for environment influence and balance performance self-checking.
Details automatic calibration due to temperature changes and how it functions.
Step-by-step guide for calibrating the balance using its built-in internal mass.
Instructions for calibrating the balance using an external weight, including usable weights.
Explains how to correct the internal mass value to conform to an external weight.
Provides detailed descriptions for parameters within the Environment, Comparator, and Data output classes.
Details how to set up the comparator function for checking weighing data against limits.
Comprehensive list of commands for querying data, controlling the balance, and managing memory.
Guides on verifying balance operation, repeatability, and environmental suitability.
Lists and explains various error codes displayed by the balance and their causes.
To Next Page
