What does parameter setting error mean on A&D GX-6000?
A parameter setting error on A&D Scales means the received data exceeds the range that the balance can accept. To resolve this, confirm the parameter range of the command.
What causes automatic response adjustment zero error on A&D Scales?
The automatic response adjustment zero error on A&D Scales indicates that there is something on the pan. Clear the pan and press the CAL key to return to the weighing mode.
What does excess characters error mean on A&D GX-6000 Scales?
An excess characters error on A&D Scales means the balance received excessive characters in a command. Confirm the command to resolve this issue.
How to resolve undefined command error on A&D Scales?
To resolve an undefined command error on A&D Scales, confirm the command you are trying to execute.
What to do for unit mass error on A&D GX-6000 Scales?
If you encounter a unit mass error on your A&D Scales, add samples to reach the specified number and then press the PRINT key.
What to do if A&D GX-6000 Scales show sample mass error?
If your A&D Scales display a sample mass error, it suggests that the sample is too small. Use a larger sample to resolve this issue.
General| Readability | 0.01 g |
|---|---|
| Calibration | External |
| Display | LCD |
| Repeatability | 0.01 g |
| Operating Temperature | 5°C to 40°C |
| Interface | RS-232C |
| Auto-off | Yes |
| Power Supply | AC adapter |
| Weighing Units | g, oz, ozt, dwt, ct, gn, tl |
| Stabilization Time | 1.5 seconds (typical) |
| Units | g, oz, ozt, dwt, ct, gn, tl |
To Next Page
