A&D UC-352BLE-V - Other Functions; Transmitting Temporarily Stored Data; Bluetooth Transmission

E-10
Other Functions
Transmitting Temporarily Stored Data
If measurement data cannot be sent to a receiver, this scale can temporarily
store data of a maximum of 90 measurements in the built-in memory. When the
scale is able to transmit to a receiver, all of the data is transmitted. If the amount
of data temporarily stored exceeds 90 measurements, the oldest data is deleted
and replaced with new data.
• Stored data cannot be viewed on this scale.
• The amount of data that can be temporarily stored may vary with the
application.
Bluetooth
®
Transmission
This product is equipped with a Bluetooth
®
wireless function and can connect to
the following Bluetooth
®
devices.
• Continua certied devices
• iPhone, iPad, iPod (iPhone 4S or later)
• Applications and devices that are compatible with Bluetooth
®
4.0
Each device needs an application to receive data..
For connection methods, refer to the manual for each device.
Bluetooth
®
Smart devices carry the Bluetooth
®
Smart logo mark.
Continua certied devices carry the Continua logo mark.