E-6
Installing (or replacing) the batteries
1. Open the battery compartment cover on
the underside of the scale.
2. Install four new AAA size alkaline batteries
with the positive (+) and negative (-)
terminals properly aligned with the
corresponding symbols in the battery
compartment.
3. Close the battery compartment cover.
Caution
• Install each battery with the positive (+) and negative (-) terminals properly aligned with the corresponding symbols in
the battery compartment.
• Improper installation of the batteries may cause battery leakage.
• Replace all four batteries with new ones, when the , symbol is displayed.
• Do not mix new and used batteries. It may cause damage to the scale or shorten the battery life.
• Be sure to use AAA size alkaline batteries. Do not use any other type of battery.
• Never use rechargeable batteries with this scale.
• The battery life is dependant upon the environmental temperature, battery type and usage.
• The batteries provided with the device are for testing the scale performance and may have a limited life.
• Remove the batteries from the battery compartment, when the scale is not to be used for a long time. Storing the scale
with the batteries installed may result in battery uid leaking from the batteries, causing damage to the scale. The
supplied batteries are for checking operation of the scale and may have a short lifespan.
Automatic Power off Function
The scale has an "Automatic power-off" function.
After the measurement results are displayed for 60 seconds, the scale is automatically turned off.
To Next Page
