Aastra 5380 - Page 150

Installation and first-time operation
150 Aastra 5380/Aastra 5380ip
eud-1282/1.3 – R3.0 – 04.2013
Wall mounting
You can also mount the phone on the wall. To do so, screw the stand rest onto the wall
as a bracket and hook the phone onto the stand rest.
• Fit the screws for securing the stand rest and mount the stand rest (Figure A).
• Connect the handset and phone cord to the phone (Figure B). For the correct con-
nection assignment refer to Chapter "Connect Aastra 5380", page 152 and "Con-
nect Aastra 5380ip", page 153.
• Insert the phone into the stand rest horizontally (Figure C-1) and slide downwards
(Figure C-2).
• Unscrew the cams for holding the handset (Figures D-1 to D-3).
• Insert the handset.
Notes:
• As there is only a limited amount of space between the sockets on the back of the
phone and the wall on which it is mounted, you need to use a ribbon cable with
a short connector for the cord. Ask your dealer for a list of suppliers for a suitable
ribbon cable (only Aastra 5380ip).
• You can only connect one Aastra M530 and one Aastra M535 (option) if the
phone is wall-mounted.