Aastra 5380 - Configuring Keys

Personalizing your phone
Aastra 5380/Aastra 5380ip 107
eud-1282/1.3 – R3.0 – 04.2013
Configuring keys
This section explains how to assign phone numbers and functions to a Foxkey or
configurable key.
Available keys
You can select the following keys for configuration purposes:
• Presence key: Preconfigured as presence menu. You can also store call numbers
and functions. The key assignment is retrievable at any time.
• Foxkeys: You can also store call numbers or functions on a Foxkey. The key assign-
ment is retrievable in the idle position only.
• Configurable Keys: You can also store call numbers or functions on a configurable
key. The key assignment is retrievable at any time.
You can assign each key with a specific action type so you can trigger a particular
action by simply pressing that key. Choice available:
• Number key: To store the phone number
• Function key: Activate/deactivate or execute a function
• Team key: Organisation within the team
• Line key: Setting up a key phone (Line keys must be set up by your system adminis-
trator).
Note:
To be able to use a configurable key, you need to make sure an Aastra M530 or
Aastra M535 expansion key module is connected. Contact your system administra-
tor for more information.
Note:
For more information about the Aastra M535 the expansion key module, see chap-
ter "Using the Aastra M535 expansion key module", page 28 and
"Aastra M530/Aastra M535 expansion key module (optional)", page 155.