Aastra 5380 - Page 31

Using the display and operating elements
Aastra 5380/Aastra 5380ip 31
eud-1282/1.3 – R3.0 – 04.2013
Switching between upper and lower case
You want to switch between upper and lower case while making an input in text
mode.
Upper-case input is automatically activated when the first letter is entered. The text
mode then automatically switches to lower-case input. Hold and press down the shift
key to enter the first letter in lower case.
Correcting your input
You notice you have entered a wrong digit or character. You can either delete the
input one character at a time or cancel the entire input.
Moving the Cursor
You want to go to a certain character for an input or correction.
With the navigation key you can move the cursor to the left or right.
To delete the last character:
Press the Correction key.
Note:
With the navigation key you can go straight to the character you want to
delete.
End input without saving:
Press the End key.
Move the cursor with the horizontal navigation key.
c