Aastra 5380 - Page 41

Supplementary features
Aastra 5380/Aastra 5380ip 41
eud-1282/1.3 – R3.0 – 04.2013
Selecting with configurable Foxkey
You want to call someone whose phone number is stored under a Foxkey.
You can dial the person by pressing the corresponding position on the Foxkey.
To find out how to configure a Foxkey, refer to the chapter "Configuring keys",
page 107.
Selecting with a configurable key on the Aastra M530/Aastra M535
expansion key module (optional)
You want to call someone whose phone number is stored under a configurable key of
the Aastra M530 or Aastra M535 expansion key module.
You can dial the person by pressing the corresponding key.
To find out how to configure a configurable key, refer to the chapter "Configuring
keys", page 107.
Press the configurated Foxkey.
➔The key’s allocated phone number is shown on the display.
Pick up the handset.
➔The phone number displayed is dialled.
Note:
To be able to store a phone number on a configurable key, you need to have con-
nected an Aastra M530⁄Aastra M535 expansion key module. Contact your system
administrator for more information.
<1x short>
Activate the key's first allocated phone number:
Press the key once.
➔The key’s first allocated phone number is displayed.
< 2x short>
Activate the key's second allocated phone number (Aastra M530 only):
Press the key twice in quick succession.
➔The key’s second allocated phone number is displayed.
Pick up the handset.
➔The phone number is dialled.