Aastra 5380 - Page 72

Supplementary features
72 Aastra 5380/Aastra 5380ip
eud-1282/1.3 – R3.0 – 04.2013
Activating personal call routing
You wan to specify which of your phone shall ring when you receive a call.
If your system administrator has set up a phone number with several phones for you
as well as the five call routings (One-number user concept, see chapter "Purpose and
function", page 7), you can specify which of your phones shall signal a call by using
the personal call routing. Your system administrator can set up up to 5 call routings.
You can only answer a call on phone where the call is signalled. Contact your system
administrator for more information.
You can activate a call routing for all phones. If you have not configured a call routing,
the default setting (all phones are ringing) is used as standard.
This function can also be stored under a configurable key (see chapter "Configuring
keys", page 107).
Activating ring alone
You wan to specify which of your phone shall ring when you receive a call.
Menu
Activating personal call routing:
Press the Menu Foxkey.
Settings
Scroll to Settings and press the Select Foxkey.
General
Scroll to General and press the Select Foxkey.
Pers. call routing
Scroll to Personal call routing and press the Modify Foxkey.
➔You are prompted to enter your PIN.
<Call routing>
Select the required routing and confirm with the Ok Foxkey.
➔Personal call routing is activated.
Reset
To deactivate personal call routing:
Using Menu > Activated features > Reset you can deactivate the Personal call
routing.
<Call routing>
Renaming personal call routing:
Press Menu > Settings > General > Personal call routing > Modify.
☛