Aastra 5380 - Page 78

Supplementary features
78 Aastra 5380/Aastra 5380ip
eud-1282/1.3 – R3.0 – 04.2013
Confirm
Confirming the alarm:
Press the Confirm Foxkey on the staff phone.
➔The alarm ends and the alarm signal is deleted from the staff phone.
Ignore
Ignoring an alarm:
Press the Ignore Foxkey on the staff phone.
➔The alarm remains active and the alarm signal is deleted from the staff
phone.
Deleting the alarm:
You can delete the alarm directly from the alarm button next to the bed.
➔The alarm ends and the alarm signal is deleted from the staff phone.
Direct response without a triggered alarm:
You can execute the direct response function without the patient having triggered an alarm first. This
function must be stored under a function key (see chapter "Configuring presence/presence profile",
page 107).
Note:
Direct response is a special variation of the intercom feature (see "Starting an
announcement", page 46). The differences are as follows:
• Direct response can only be used with a specifically configured
Aastra Alarm Server.
• Direct response can only be triggered using the Direct response Foxkey once an
alarm is received.