Personalizing your phone
Aastra 5380/Aastra 5380ip 93
eud-1282/1.3 – R3.0 – 04.2013
Installing a Bluetooth module
Your phone can be equipped with a Bluetooth module as an option.
As soon as you have connected a Bluetooth module to your terminal, you can activate
the Bluetooth operation and connect Bluetooth devices. Contact your system admin-
istrator to install a Bluetooth module.
Installation:
• Fit foam spacers on the connector side of the Bluetooth module (for the position of
the foam spacer see figure 1). The spacer ensures that the Bluetooth module sits
securely.
• Carefully remove the cover for the Bluetooth module on the underside of the
phone using a suitable screwdriver (see figure 2).
• Connect the Bluetooth module. Make sure it is securely fitted (see figure 3).
• Fit the cover for the Bluetooth module back into place and press home until it
snaps into place (see figure 4).
Note:
Always disconnect the phone from the mains power first before you install a
Bluetooth module.