Aastra 5380 - Page 98

Personalizing your phone
98 Aastra 5380/Aastra 5380ip
eud-1282/1.3 – R3.0 – 04.2013
Changing the PIN
You want to change the PIN used to lock/unlock your phone (see chapter "Locking
your phone", page 61 and "Unlocking your phone", page 62).
The digit combination "0000" is set as default. You can select any 2 to 8-digit combina-
tion for your new PIN.
If you have forgotten your PIN, your system administrator can reset it to the default
setting. Depending on the system settings the function may not be available.
Note:
Your PIN applies to all your phones.
Menu
Press the Menu Foxkey.
Settings
Scroll to Settings and press the Select Foxkey.
General
Scroll to General and press the Select Foxkey.
PIN
Scroll to PIN and press the Modify Foxkey.
➔The display shows Old PIN.
<Old PIN>
Enter the old PIN and confirm with the Ok Foxkey.
➔The display shows New PIN.
<New PIN>
Enter the new PIN and confirm with the Ok Foxkey.
➔The display shows Confirm.
<New PIN>
Enter the new PIN a second time and confirm with the Ok Foxkey.
➔The new PIN is stored.
Notes:
• For each digit entered, the display shows an "*".
• You can also change the PIN with function code *47 (see "User’s Guide Func-
tion Codes" on the Aastra DocFinder).
☛
☛
☛