Aastra 612d - Page 102

Personalizing your phone
102 Aastra 612d
eud-1584/1.0 – R3.0 – 04.2013
Storing a function on a key - function key
You want to retrieve a frequently used function - for example "call forwarding on no
reply" - using a single keystroke rather than having to enter it by hand. Usually you
assign the function so that you:
• activate the function with the first keystroke,
• and deactivate the command again with a second keystroke.
Function selection for configurable key
This section contains a list of all the functions you can store under a configurable key
via the menu. Contact your system administrator for more information.
More information on how to store functions under a configurable key using function
commands and function code can be found in chapter "Formulating functions",
page 105.
Storing a function under a key (from a predefined selection of functions):
<long>
Keep the key you want pressed down for approx. 2 seconds.
Or:
The keys are also available via the menu: Menu > Settings > Keys > Softkeys.
New
Creating a new key assignment:
1. Press the New softkey and select Function key.
2. Select the function and the setting you want and confirm with the Save soft-
key.
➔Key assignment is stored.
Modify
Modify a key assignment:
1. Press the Modify softkey.
2. Make the changes and confirm with the Save softkey.
➔The key assignment is now stored.
Delete
Deleting a key assignment:
Press the Delete softkey.
➔Key assignment is deleted.
Notes:
• The selection of functions can be found in the chapter "Function selection for
configurable key", page 102.
• In addition to the large number of predefined functions you can also write your
own function (see chapter "Function commands, function codes", page 105).
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46