Aastra 612d - Display Settings

Personalizing your phone
Aastra 612d 85
eud-1584/1.0 – R3.0 – 04.2013
Display settings
This section explains how to set display properties.
Setting the display
You want to optimise the display settings.
You can activate or deactivate the following settings:
• Font: Font size
• Color scheme
• Backlight
– Brightness: Display brightness.
– Idle timeout: Amount of time the keypad and display backlight remain switched
on after you press a key.
– Charging unit timeout: Amount of time the keypad and display backlight remain
switched on when the cordless phone is placed in the charging unit.
– Backlight during call: Switch on the function to ensure the display remains lit for
the entire duration of a call.
Note:
If you do not switch on the Backlight during call setting, the keypad and display
backlight is switched off automatically 10 seconds after the call is set up. If you
receive another call or an alarm, the backlight is switched back on again for 10 sec-
onds in each case.
Press the navigation key to the right or the Menu softkey.
Settings
Scroll to Settings and press the Select softkey.
Display
Scroll to Display and press the Select softkey.
<Display setting>
Scroll to the display setting you want and press the Select softkey.
<Display setting>
Select the display setting you want.
Note:
The Select softkey displays the colour scheme you want.
➔The setting is stored.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46