Aastra 612d - Undoing Actions; Resetting Activated Features

Using the display and operating elements
Aastra 612d 33
eud-1584/1.0 – R3.0 – 04.2013
Undoing actions
To cancel operating steps, proceed as follows:
Activate/deactivate function
You can enable or disable a function or a menu entry by selecting the entry you want
and pressing the Select softkey.
Resetting activated features
You can deactivate again all the activated functions (e.g.Forwarding).
Exit editor without changes:
Press the End key.
Scrolling back through the menu step by step:
Press the Correction key.
Back to the idle state in the menu:
Press the End key.
Select
Activate/deactivate function:
Press the Select softkey.
Press the navigation key up.
➔Menu Activated features is opened.
Or:
Activated features are also available via the menu: Menu > Activated features.
Reset
Press the Reset softkey to deactivate the function you want.
➔The function is now deactivated.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46