Supplementary features
Aastra 612d 67
eud-1584/1.0 – R3.0 – 04.2013
Activating ring alone
You wan to specify which of your phone shall ring when you receive a call.
When your system administrator has set up a phone number with several phones
(One-number user concept, see chapter "Purpose and function", page 8), you can
define on which phones a call shall acoustically be signalled using ring alone.
When you have activated ring alone on a phone, the acoustic ringing tone is deacti-
vated for all other phones ( ). An incoming call is signalled in the display of all
phones. You can answer the call on each of your phones.
This function must be stored under a function key (see chapter "Configuring keys",
page 101).
Note:
When you have activated ring alone but deactivated the personal call routing for a
phone in parallel, an incoming call is not acoustically but only visually signalled.
Ring alone
In the idle state:
Press the function key for Ring alone.
➔Ring alone is activated/deactivated.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
To Next Page
Loading...
