5
Basic Installation
4. Attach the cords to the telephone stand 5. Mount the telephone on the wall
Route the cords along the groove on the
telephone stand as shown in the illustra-
tion.
It is recommended that you use a wall-mounting
plate which is available through your telephone
company or a local retailer. You will find it easier to
wall-mount the telephone if you purchase one short
20 cm (8”) telephone cord and use it in place of the
long telephone cord.
Coil the telephone cord(s) into the space provided
on the back of the telephone.
Line up the keys on the wall mounting plate with
the key holes on the back of the telephone.
Place the telephone onto the wall mounting plate,
and then push down to secure the telephone into
place.
6. Insert the number card on your
telephone
7. Insert the Memory key card on your telephone
Write your telephone number on the
number card.
Place the number card into the slot
underneath the handset cradle on the
on the telephone.
Gently bend the clear plastic lens and
place it on top of the number card in
the slot.
This card contains the feature names for the dedicated
keys and label identification spaces for the eight pro-
grammable memory keys.
Place the card into the memory key card slot on the tele-
phone.
Gently bend the clear plastic lens and place it on top of
the memory key card in the slot.
For more information on programming memory keys,
refer to Memory keys on page 15.
O
p
t
i
o
n
s
D
ir
e
c
to
r
y
Delete
S
h
i
f
t
S
a
v
e
To Next Page
Loading...
Need help?
General
Weight and Dimensions
