Need help?Do you have a question about the Aastra M740E and is the answer not in the manual?
General| Number of Lines | 4 |
|---|---|
| Headset Support | Yes |
| Speakerphone | Yes |
| Supported Protocols | SIP |
| Display | Graphical LCD |
| Connectivity | Ethernet |
| Audio Quality | Wideband audio |
| Power over Ethernet | Yes |
| Network Ports | 2 |
| Power Supply | PoE |
| Audio Codecs | G.711, G.722, G.729 |
Describes how to install digital and IP terminals and details available options.
Compares functional characteristics across M7xx and i7xxx ranges with various software releases.
Covers specific configuration requirements for IP sets based on model and network setup.
Explains how to restore factory settings, erasing local programming and reinitializing the set.
Introduces the i220 SIP set, its management via NeXspan Communication Server, and SIP gateway.
Compares telephony features across SIP phones 480i, 9112i, and 9133i.
Details the architecture using the SIP access point hosted by NCS.
Outlines methods for configuring SIP phones: direct access, WEB interface, or DHCP/TFTP.
Explains how to manually configure SIP phone IP parameters directly on the device.
Describes the 536M expansion module, its features, and compatibility.
Describes the 560M expansion module, its features, and compatibility.
Compares telephony features across SIP phones 51i, 53i, 55i, and 57i.
Details the architecture using the SIP access point hosted by NCS.
Outlines deployment phases for SIP phones, covering TFTP download and DHCP configuration.
Introduces the Aastra Phone 312, listing its components and general requirements.
Covers the installation process, including starting the charging station and activating the handset.
Lists critical safety instructions for Li-ion batteries to prevent hazards.
Provides safety guidelines for using and charging the storage batteries.
Explains how to integrate the handset into a WLAN and register it for access points.
Provides a comprehensive list of telephony features for Aastra 312 WLAN and 1.0.5/GN7.
Lists technical specifications for the Aastra Phone 312, including standard, frequency, and power.
Explains configuring the 312i terminal with a DHCP server for automatic IP settings.
Guides on registering the handset with a WLAN network by configuring profiles.
Details steps for configuring WLAN profiles via Site Survey or manual configuration.
Explains how to save and select accounts for SIP servers on the handset.
Provides an overview of SIP server parameters including System name, SIP server, and codecs.
Describes how to add, edit, or delete SIP server accounts on the handset.
Provides instructions and diagrams for connecting M7xx and IP i7xx range sets.
Explains the purpose of the download tool for upgrading software and backup/restore operations.
Provides a step-by-step guide to installing and configuring a DHCP server for i7xx sets.
Explains how to create and configure DHCP scopes, including IP address ranges and options.
Guides on creating and configuring DHCP scopes, defining IP ranges, subnet masks, and lease durations.
Details creating a specific vendor class for i7xx sets for DHCP server configuration.
Explains how to define options for a new vendor class, including Call Server and VLAN settings.
Guides on configuring advanced options for vendor classes, such as Call Server and VLAN settings.
Explains connecting and configuring i7xx sets using DHCP server for network parameters.
Details configuring network parameters for i7xx sets via Partial or Full DHCP modes.
Describes the full DHCP procedure in a multi-VLAN environment with multiple DHCP servers.
To Next Page
