6
 
Personalizing your phone
 
The 9216 has seven options to personalize your phone. Move the sliding panel which is located 
below the display and press the Set Options key to see each of the choices. You can change any 
of the seven feature options by following the change procedure at the bottom of the page.
 
Setting your options
1. Change the display language
 
You have a choice of display messages in one of two languages.
 
2. Setting the date and time
 
You can set the time and date. If you subscribe to Call Display, the current time and date are 
automatically set for you when the first call comes in. This also happens after a power failure.
 
3. Setting the ring tone and ringer volume
 
You can choose one of four different ring tones. And while you are selecting the ring tone, you 
can adjust the ringer volume by pressing the volume bar below the dial pad. Use 
 
Ω
 
 to end 
only when you are satisfied with the ring tone and volume.
 
4. Turn the Light OFF
 
You can program a memory key to turn the light ON and activate a feature at the same time (see 
page 8). If you don’t want the light ON while the feature is active, use this option to turn the 
light OFF.
 
5. Enter your area code
 
If you don’t want Call Display to show the area code of local calls, enter your area code.
 
6. Change the Callers List
 
The Caller List keeps a record of up to 15 calls. Program your Callers List to record all incoming 
calls or only unanswered calls.
 
7. Adding a timer key
 
To keep track of the length of your calls, you can program a timer into one of the memory keys. 
With the press of one key, you can turn the time ON or OFF.
 
To change any of the seven options:
 
1. Don’t pickup the receiver.
2. Slide the panel (which is located below the display) and press the Set Options key. 
3. Press 
 
)
 
 to move through the list of options.
OR
Press the desired option number on the dial pad. (For example, when 7 items in list 
appears on the display, press 2 to set the time and date.)
 
4.
 
Press the selected option number again (1 through 7) and follow the instructions on the dis-
play to make a change.
 
P0735793 04 E UG  Page 6  Tuesday, March 28, 2000  5:23 PM