Aastra TA7102i - Page 10

TA7102i Hardware Installation
© 2014 Aastra Sweden | 153_1531 ANF 90114| A | 2014-01-24 A 9
2.1 Connectors and Indicators
This section provides an overview of the front and rear panels of the TA7102i.
Product Serial Number Location
The serial number label for the TA7102i device is located on the bottom of the unit.
Front Indicators and Connectors
See “Indicators (LEDs)” for a description of the LED patterns the TA7102i may have and the
states they represent.
Figure 1 shows the four visual indicators located on the front of the TA7102i.
Figure 1: TA7102i Front Panel Indicators
Table 2 describes the connectors on the front panel of the TA7102i.
Table 2: TA7102i Front LEDs
LED
Description
1.
Ready
When lit, the TA7102i is ready to initiate or receive a call. The
unit does not have to be registered to a server.
2.
In Use
When lit, at least one of the FXS lines is in use.
1 2 3 4