Aastra TA7102i - Page 12

TA7102i Hardware Installation
© 2014 Aastra Sweden | 153_1531 ANF 901 14| A | 2014-01-24 A 11
Rear Connectors
The TA7102i has several connections that must be properly set. Figure 2 shows the rear panel
of the
TA7102i.
Standards Supported -ITU-T I.430 Basic user-network interface - Layer 1
specification (section 9).
Figure 2: TA7102i Rear Panel Connectors
1 2 3 4 5
Table 3 describes the rear panel connections (from left to right).
Table 3: Rear Connections of the TA7102i
Connect
ion
Description
Phone-
Fax 1 /
Phone-
Fax 2
Two RJ-11 connectors to attach a conventional
telephone or G3 fax machine.
LAN
A 10/100 BaseT Ethernet RJ-45 connector that
can be connected into the network card of a
computer.
WAN
A 10/100 BaseT Ethernet RJ-45 connector for
access to a LAN, WAN
or computer.