TA7102i Hardware Installation
© 2014 Aastra Sweden | 153_1531 ANF 90114| A | 2014-01-24 19
Condensation
When bringing the unit into a warm environment from the cold, condensation may result that
might be harmful to the unit. If this occurs, allow the unit to acclimatize for an hour before
powering it on.
Cleaning
To clean the TA7102i, wipe with a soft dry cloth. Do not use volatile liquids such as gas and
thinner that are harmful to the unit casing.
For resistant markings, wet a cloth with a mild detergent, wring well and then wipe off. Use a dry
cloth to dry the surface.
To Next Page
Loading...