TA7102i Hardware Installation
© 2014 Aastra Sweden | 153_1531 ANF 90114| A | 2014-01-24 32
Factory Reset
The Factory reset reverts the TA7102i back to its default factory settings. It deletes the
persistent MIB
values of the unit, including:
• The firmware pack download configuration files.
• The SNMP configuration, including the SNMPv3 passwords and users.
• The PPPoE configuration, including the PPP user names and passwords.
•
The Factory reset creates a new configuration file with the default factory values. It should be
performed with the TA7102i connected to a network with access to a DHCP server. If the unit
cannot find a DHCP server, it sends requests indefinitely.
To Next Page
Loading...