Need help?Do you have a question about the AAVIK U-280 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Input Impedance | 10 kΩ |
| Power consumption, Standby | <0.5W |
| Power consumption, Idle | 30 W |
| Inputs | RCA, XLR |
| Outputs | 1 x RCA (Pre-out), 1 x Headphones |
| Frequency Response | 10 Hz - 100 kHz |
| Signal-to-Noise Ratio | >110dB (A-weighted) |
Describes the top and bottom line displays and format reception.
Explains how to enter/exit standby and startup behavior.
Details mute function and Apple remote pairing process.
Explains source selection and menu entry via navigation button.
Describes its use for volume, source, or settings.
Explains spade and banana plug connections for speaker output.
Details uses for subwoofer, power amp, or headphone amp.
Lists supported digital inputs like BNC, Toslink, and USB.
Details gain and impedance for line inputs across models.
To Next Page
