Do you have a question about the AAVIK C-300 and is the answer not in the manual?
Type | Integrated Amplifier |
---|---|
Input Impedance | 10 kΩ |
Inputs | RCA, XLR |
Outputs | 1 x RCA |
Power Output | 2 x 300W / 8Ω |
Dimensions | 430 x 105 x 370mm (W x H x D) |
Details output voltage, distortion, and impedance for the preamplifier.
Describes phono input impedance, frequency response, noise, and gain.
Details line input gain and impedance for Line 1, 2, and 3.
Lists digital input types (RCA, TOSLINK, USB) and their specifications.
Specifies volume adjustment range and step size for the preamplifier.
Details trigger output voltage, current, and socket type.
Provides physical dimensions and weight of the preamplifier.
Lists 12 points for safe operation, cleaning, and placement of the unit.
Details when service is needed and important warnings for user safety.
Explains mute button functions for various front panel settings.
How to set individual volume offsets between inputs.
How to adjust cartridge loading for the phono stage.
How to adjust the left/right channel balance.
How to place the amplifier in standby or switch it on.
How to select sources and pair a remote control.
Describes the functions of the 18 LED volume display.
Explains the LED indicator for the selected source.
How to use the rotating knob for various adjustments.
For firmware updates and remote control.
DC trigger outputs for powering other equipment.
Overview of USB, TOSLINK, and RCA digital inputs.
Details the USB input specifications and driver requirements.
Specifications for the optical S/P-DIF TOSLINK inputs.
Specifications for the electrical S/P-DIF RCA digital inputs.
Function of the power switch and standby power consumption.
Mains voltage acceptance and connector type.
Details single-ended RCA line inputs and their impedance.
Describes the RCA phono input, RIAA EQ, and gain.
Details single-ended (RCA) and balanced (XLR) line outputs.
Procedure to reset all settings to factory defaults.
Explains the functions of remote control buttons like Volume, Input, Standby, Menu, Mute.